|
|
|
|
|
|
|
#1
04-22-2001, 05:52 PM
|
||||
|
||||
|
ok - road test number 48
"teed" into the line from the aneroid to the vacuum amplifier ran the car for a few miles and under load, seemed to level out at around 9 psi, highest I saw was 9.5 psi. Did not seem to want to go any higher - I guess this is an indication that the waste gate is opening. Looks like the boost works. Could the "vent" line that allows it to go to 0"Hg vacuum be plugged? I will test the vacuum pressure again after I have replaced the brake vacuum line check valve (with the "fixed" orifice size). I will not be surprised if that is not some of the problem because of some diyer "cleaning" the line out
 The car ran good during the whole test. Jim '85 300D '95 E320 '97 CRV 
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Opinions on purchasing a 1987 300D | swogee | Diesel Discussion | 12 | 05-03-2005 10:27 AM |
| 1976 W115 300D motor into 1979 W123 300D | sebtowne114 | Diesel Discussion | 5 | 04-14-2005 07:26 AM |
| 300D turbo slushbox vs 300D n/a 4 speed | The Warden | Diesel Discussion | 5 | 05-28-2004 12:40 AM |
| How did my 300D return from the Dead? | Carrameow | Diesel Discussion | 10 | 05-17-2004 08:21 PM |
| Mercedes Parts FS!! 300e & 300d Cruise Control, 450sl fuel distributer, 300d cluster | 6cndmbz | Mercedes-Benz Used Parts For Sale & Wanted | 0 | 04-18-2004 02:31 PM |
Hybrid Mode
