|
|
|
#1
|
|||
|
|||
1989 mercedes 190e engine swap
I recently put a motor out of an 86 300e into my 89 190e. I have no signal to the fuel pump, therefor not recieving any fuel. Do I need to change any of the control modules?
Thanks, Scott |
#2
|
|||
|
|||
Those engines use a fuel system that is basicly the same..
I would check the signal of the crank sensor at the ignition module. How long was the car sitting? Have you tried jumping the fuel pump relay?
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|