Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 04-23-2001, 12:48 PM
Posts: n/a
After a little thought and after reading some posts here, I have isolated my 1987 190E 2.6 heater/AC fan problem. Now how do I fix it? If I put the key in the ignition and turn it to position 2, the fan for the heater/AC works. When I turn the key a bit further to start the car, it starts OK, but the fan for the heater or AC stops. Even before starting the car, if I wiggle the key while in position 2, the fan will turn off.

My wife always had a massive keychain dangling from the key, so I'm led to believe that weight messed up the ignition.

So, here's the question. What needs to be replaced and how do I get the ignition out? Thanks in advance for your help!
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
108 Ignition Switch questions 68_Mercedes Vintage Mercedes 8 11-10-2004 02:09 PM
ignition switch help SomaPusher Tech Help 8 09-30-2004 09:13 PM
ignition switch problem colinr Tech Help 2 06-20-2002 01:30 PM
Ignition Switch HELP!!! 300CE Squid Tech Help 3 02-01-2002 04:27 PM
ignition switch question (continued) Nate Stanley Tech Help 1 12-11-2000 10:37 PM

All times are GMT -4. The time now is 03:51 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page