Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 04-28-2001, 02:14 AM
Posts: n/a
pulled over at a gas stop to pump gas.. only to realize that i could not open my gas lid. when i unlock the car, all locks open except for the gas lid cover. is this a vacumn problem? the small pin that holds the lid locked isn't being released. i have a 94 E420.

Reply With Quote
Old 04-28-2001, 03:55 AM
David C Klasse's Avatar
CheFrac is Back!
Join Date: Jan 2001
Location: Mission Hills in the City of San Diego
Posts: 2,352
I am assuming you knew this and filled up... but, just in case, There is an emergency release in case the door filler cover does not open. It is behind the paneling in the trunk.
Other than that, I do'nt have any other info to offer. GOod luck!
2006 E350 w/ 155k miles (Daily Driver)

1993 300E 3.2L Sedan w/ close to about 300k miles
2003 E500 Brilliant Silver (Had 217k miles when totalled!)
1989 300E with 289,000 miles (had for <1 yr while in HI)
03 CLK 500 cabrio (Mom's)
2006 C230k (Dad's)
1999 S420 (Mom's/Dad's)
2000 C230k Sport sedans
2001 CLK320 Cabrio (Mom's)
1995 C280 My First Mercedes-Benz... (155k miles. EXCEPTIONAL AUTOMOBILE. Was Very hard to let go of!)
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Do I need a new airbag? Eliot Tech Help 36 05-30-2006 10:42 AM
After HPS Open House June 5, 2004 at Mech-Tech Motorsports Adam@HPS Events & Gatherings 2 09-09-2004 04:36 PM
Gas Cap Leak! gmacosta Tech Help 4 11-13-2003 01:51 PM
Gas leak 1991MB300e Tech Help 2 10-09-2003 02:24 AM
Trunk lid alignment Ben300SD Tech Help 3 05-01-2001 06:25 PM

All times are GMT -4. The time now is 11:53 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page