95 E320 how to read codes?

[Qamar]

Had read in this forum about how to read codes. But in my car there is no push button on the connector.Can any one guide me that how to read codes specially when the push button is not there.

[Kestas]

Push button is Number 2. Press and hold down for 2-4 secs. Then count the number of flashes.

E320 16 PIN DTC Charts inc. pin 8, pin 14

[Arthur Dalton]

Push Button is only on Cal Versions.. You can acess the codes with a Led/Sw tool
Use pins 1 for ground, 16 for 12v pos and 3 for DM codes.

[juribe2]

Originally Posted by Arthur Dalton

Push Button is only on Cal Versions.. You can acess the codes with a Led/Sw tool
Use pins 1 for ground, 16 for 12v pos and 3 for DM codes.

Hi Arthur,

Do you have a diagram or some detailed instructions to build the Led/Sw tool? I've doing some search but can't find a diagram. Thanks.

[Kestas]

Here it is:

E320 16 PIN DTC Charts inc. pin 8, pin 14

[pcmaher]

This links may help also...

http://v12uberalles.com/pulling_codes.htm

Make sure you read Jim F's page thoroughly.