Hi

A while back I posted a problem regarding no reverse gear. I finally got around to pulling the transmission off and trying to fix the problem. Found the problem (broken springs on pressure plate) and repaired that plus replaced the b3 friction discs.

Put it back together bolted it back up and tested it out.

Reverse works great, engagement in R and D is perfect.

My problem now is I can't shift into 4th gear. It goes from 1-2 real smooth and 2-3 real smooth but I can wind it up to 4000 rpm and still won't shift and when I let off it just engine brakes.

The car is my 350SDL and the transmission is a 722.361.

Can anyone think of an obvious culprit considering the fresh rebuild? No other clutch packs were touched, I didn't pull the planetary gears or K2 though all pistons, governor, aux. pump were pulled an reinstalled. Valve bodies were removed too.

I'm desperate here and am at a loss for where to look

Any help would be enormously appreciated.

Cheers

Bob

__________________
1982 300TD 210K miles ("The Replacement" aka "The Anvil") - SOLD
1979 300SD 245K miles (never ending project)
2007 Pinarello F3:13
1995 Ducati 916 (SOLD, sniff)
1999 Ducati 900SSie (SOLD)