Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 05-03-2001, 06:51 PM
Senior Member
Join Date: Mar 2001
Location: Accokeek, MD
Posts: 683
The next time it happens, note which bulb is out. Then inspect the bulb carefully and clean the sides of the metal base (ground contact) and then clean the lead colored point(s) at the very bottom tip of the bulb. Then clean the positive and ground contacts inside the socket that the bulb plugs into.

Sounds to me like a contact problem brought on by the dampness of a dark garage.

You can clean by scratching bulb with tip or blade of pocket knife or similar tool.

Also make sure ther is sufficient tension on the 'spring' contacts inside the socket.

[Edited by ejsharp on 05-03-2001 at 06:55 PM]

1993 190E 2.3
2000 Toyota 4x4 Tundra
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
my next mod: Bi-Xenon HID headlamp upgrade run.exe Performance Paddock 95 10-26-2004 10:56 PM
bulb for center vent control sjsfiji Tech Help 2 08-13-2003 06:05 PM
E320 (1998): Changing the right headlamp bulb. Roger Jones Tech Help 0 06-19-2001 08:55 PM
amp questions ISh Car Audio and Multimedia 28 05-03-2001 09:21 PM

All times are GMT -4. The time now is 11:45 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page