|
|
|
#1
|
||||
|
||||
Aditco Rebuilds?
So what is everybody's thoughts and experiences wit rebuilt components from Adsitco, I am thinking of purchasing a rebuilt long block and Tranny for my coupe and have it installed........
Not there is anything wrong with what I have the drivetrain has been bulletproof for 400k + miles...just want to update the mechanicals and run it for another 20+ years.... |
#2
|
|||
|
|||
I would make CERTAIN that you understand their return policy and shipping charges....
Caveat emptor. |
#3
|
||||
|
||||
They HAVE a return policy? Do a search here, you may change your mind on Adsitco . I've heard Metric Motors Inc. is the way to go.
__________________
1989 300E 144K |
#4
|
|||
|
|||
I used SunValley for my rebuilt tranny. Yes they do have rebuilds with 2 year unlimited mile warranty. They pay freight to return the core. My 91 300E rebuild was with 722.358 tranny was $1250 + 200 in freight charges. They say they dyno before ship, but mine looked very dry, so I can't say for sure.
My problem was reverse slipping very bad. |
#5
|
|||
|
|||
Quote:
I have always been uncomfortable with owners that replace whole engines and transmissions. Buyers often wonder what was so horribly wrong that the whole engine and transmission had to be replaced. Many buyers will assume that its a high mileage abused car. While at 400K your car has little collector value one never know's what the future holds. With most MB engines the block's are known to last the lifespan of the car while the top end is what is generally overhauled. Realistically even if you put in a new engine and transmission a car with that kind of mileage is not going to be any more reliable. My 300SD has over 380K and still drives great but I know enough not to push my luck by using it as a full time everyday commuter car. Sort of like taking a 75 year old grandmother and expecting her to do an olympic marathon. |
#6
|
||||
|
||||
I'd never buy one.
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#7
|
||||
|
||||
Sun Valley can rebuild a transmission in a couple days I think. Which means it can be rebuilt and back in the car in record time. Is this true? Do they do that? That's cool. Do they build motors too???
Jason
__________________
1988 300CE 120K RIP(Midnight Blue/Parchment) 1987 300E 202K (Arctic White/Palomino) Now I see the secret of the making of the best persons. It is to grow in the open air and to eat and sleep with the earth. ~Song of The Open Road |
#8
|
||||
|
||||
Sun Valley
I've been looking around at these guys online and they are amazing. Not only do they have a page of big photos from a trip to the Classic Museum in Stuttgart but they have a few businesses. They sell used tested parts with warranty. They have over 200 cars in the yard. They build motors and transmissions. Then they also have a new parts store, which is online and has everything you could ever want to build motors and transmissions yourself. The online new parts store is great, they have photos, descriptives, parts numbers, all brand names for all items and great prices. They show what is available, what is a genuine item, what list prices are and what they are selling it for. It's all premium stuff, no crap and great prices. Very honest and informative site. Just what i've been looking for. From looking at the catalog I've learned more about the Trans. Modulator Valve and the Torque Convertor Seal and Trans Rear Seal Ring and everything for gaskets and seals. They have everything here. And they are in my backyard. I think I'm driving out to see them ASAP. Thanks again for the heads up on Sun Valley.
Regards, Jason PS Now I can build my own motor and trans and swap them for the originals. Then build the originals and put them back in or keep as original extra back-up.
__________________
1988 300CE 120K RIP(Midnight Blue/Parchment) 1987 300E 202K (Arctic White/Palomino) Now I see the secret of the making of the best persons. It is to grow in the open air and to eat and sleep with the earth. ~Song of The Open Road |
#9
|
||||
|
||||
Ah ha! Can those be got? Definitely the end of story.
Jason
__________________
1988 300CE 120K RIP(Midnight Blue/Parchment) 1987 300E 202K (Arctic White/Palomino) Now I see the secret of the making of the best persons. It is to grow in the open air and to eat and sleep with the earth. ~Song of The Open Road |
#10
|
||||
|
||||
Yes but they are expensive.
I don't know what engine he has but a 603 crate engine runs about $13k, throw in another $2,500-$3k for a brand new trans. I wouldn't put that kind of money into a 400k mile car. Buy a better example. If he has an M119, then we are talking about $20k.
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#11
|
|||
|
|||
Metric Motors IS the way to go. since I've guit rebuilding engines 10 years ago I've used metric quite a few times. They do a very complete job. They do only mbz. Gus "the man" from pacific fuel injection rebuilds their injection pumps. I've never had a problem
__________________
Paul Roberts Mercedes Centrum Inc. Bellevue,WA. |
#12
|
|||
|
|||
Quote:
Another option for you. Rather than butcher your current CE with engine swap hell why not get an additional CE. It sounds like you drive it every day. With two cars the mileage would be split in half on them both and if one goes down you have the other. Cheaper and easier than engine swaps. Just an FYI. I have driven cars that have had engine swaps. It takes quite some time to get them completely sorted out. With all the Vacuum lines and electrical connections sometimes things are connected wrong. I owned a car and had to have a new engine put in it (japanese car) and it took months to solve some issues with the transmission shifting funky from time to time. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|