Can anyone tell me how many foot pounds of torque are required for the bolts on the waterpump of an M 104 waterpump?

Antonino

25ft/lb

17 ft/lbs

According the MB maintenance CD, it is 25lbft.
Procedure No. 20-2100

25 Nm, NOT ft/lb.

I don't have the CD. Haynes manual is showing 17 ft/lbs or 23 nm for 104 motor.

You are both right, I was wrong.
It is 25Nm, not 25ftpd. Sorry for the confusion.

Thanks for the info guys...given where the pump is it makes it difficult to get the bolts on let alone get a torque wrench in there.

Antonino