|
|
|
#1
|
||||
|
||||
Crank Position Sensor Replacement
AllData says I must "re-initialize" the CPS after replacement ... I do not have access to a MBZ Scan Tool to perform such a task ... Now What ????
'00 SL500 |
#2
|
|||
|
|||
Cps
I replaced the one in my 99 SL, (plug and play) and it just worked on it's own, the same 113 engine and electronics as in your's, it should just work.
|
#3
|
||||
|
||||
you're supposed to rest the sensor adaptation with SDS and reinitialize it by driving 2100-2400 rpm for 30 secs in 3rd gear.
__________________
1980 500SE/AMG Euro 1981 500SEL Euro 1982 380SEL 1983 300TD 1983 500SEC/AMG Euro 1984 500SEC 1984 300TD Euro 1986 190E 2.3-16 1986 190E 2.3 1987 300D 1997 C36 AMG 2003 C320T 4matic past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350 |
#4
|
||||
|
||||
CPS Replacement
Thanks for all the help ..... I will follow the instructions ......
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|