Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-17-2007, 11:17 AM
Registered User
 
Join Date: Aug 2006
Location: Houston, TX
Posts: 450
Climate Control question

New duovalve/pump assembly recently installed. Also have rebuilt CC unit. Getting good heat left & right. CC is showing E075, which indicates problem with duovalve pump.

When you drill into the troubleshooting steps for E075, it indicates you should check the left connector at the CC for pin 12 to ground. With the dials set at blue detent, it says you should see 11-14v, and with the dials at the red detent, you should see <1v. This seems COMPLETELY BACKWARDS to me - shouldn't voltage be present when full heat is selected, and absent when full cool is selected?

The car has a new wiring harness, if that matters.

Reply With Quote
  #2  
Old 01-17-2007, 01:23 PM
Registered User
 
Join Date: Aug 2006
Posts: 141
Heater problem

That is correct information! The hot water valve closes when 12v is applied.
Mike

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page