|
|
|
|
|
|
|
#1
01-21-2007, 12:01 AM
|
||||
|
||||
|
96 S420 radiator fluid drain
Just got the car a week ago and im doing the maintaince on it.
Well it has the nasty green goop coolent so i bought the correct MB stuff to change it out but i cant seem to find the drain plug under the radiator  From what ive worked with (83 SD and 87 D) there is a plug under the radiator that you unscrew to let the coolent out. But i dont see it on this car's radiator. Is there no drain plug or am i missing something?
__________________
Current: 05 E320 CDI 07 GL320 CDI 08 Sprinter 05 Dodge Cummins 01 Dodge Cummins Previous 2004 E55 AMG 2002 C32 AMG (#2) 1995 E300 1978 300D 1987 300D 2002 C32 AMG(blown motor :[ 1981 300SD 1983 300SD 1987 300SDL 2002 Jetta TDI 1996 S420 1995 S500 1993 190E 2.6 1992 190E 2.3 1985 190E 2.3 5-Speed 
|
|
#2
01-21-2007, 02:54 PM
|
|||
|
|||
|
take off the lower left chin luver, you'll see a plastic plug just turn it counter clock wise and stay clear cause water will flow out form there, make sure your car is cool enough to work on the water system, better safe than sorry. All 140 have the same location for the drain plug, unless the radiator have been altered.
|
|
#3
01-24-2007, 03:37 PM
|
||||
|
||||
|
Don't forget the block drains. One on each side by the enging mount arms. IIRC they point straight down. They're petcocks so you only have to loosen, not remove. They're smaller than the one that takes a 19mm socket on the exhaust side of a 603.
Sixto 93 300SD 3.0
|
 |
| Bookmarks |
|
|
Hybrid Mode
