yes,
1) doors closed
2) waited untill all indicators were off
3) tounr key to pos 2
4) push reset button twice in 4 sec
5) turn key back to pos 1
6) press and hold reset turn to pos 2 until beep (never hear it)

Clueless here... I am I doing the right steps?

I dont ever hear a beep on mine iether.

Did you read this one.....subtle changes based upon year.

Reset the FSS (Little Wrench)?

__________________
Terry Allison
N. Calif. & Boca Chica, Panama

09' E320 Bluetec 77k (USA)
09' Hyundai Santa Fe Diesel 48k (S.A.)

No not quite.

According to this scan of a December 1997 S320 german manual,
it should be;

1. Key to pos 2 and quickly press the button 1 twice inside a timespan
of 1 sec.
2. The last Service mileage lights up.
3. Turn key back to pos 0 before 10 sec since step 1.
4. Press button 1 and turn key to pos 2 again.
5. Keep holding button 1 until you hear a beep (10 sec)

My german is not that good, so mistakes in the translation
can be (and probrably is) present.

Here is the scan also:



br,
syljua

__________________
1998 CL500 W140
1984 230E W123