|
|
|
#1
|
||||
|
||||
trunk wont open with key
00 E430, the trunk wont open with the key. have tried both keys in the big and small IR keys. I can insert the key and push the key but the metal key doesnt turn right or left as indicated in the manual.
Any ideas ? Is the lock jammed or am I missing something ? thnx.
__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford. |
#2
|
|||
|
|||
1 - you dont have much leverage with that blade. you sure you are using
sufficient force to turn? 2 - can you using the same key and open driver side door? 3 - when using in truck lock, do you feel resistance as if the 'tumblers' are not tripped, ie the key is not matched for the lock?
__________________
-- raymond~ 47º 34'N 122º 18'W |
#3
|
||||
|
||||
Quote:
__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford. |
#4
|
||||
|
||||
Are you stuck on the inside with the keys, or the outside??
|
#5
|
||||
|
||||
not sure if i follow, but i'm referring to the trunk lock on the back of the car where you put the key to open it up from the outside. right below where the registration plate is.
__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford. |
#6
|
||||
|
||||
I only use the remote button for my trunk, but don't you turn the key blade first and then push the button?
__________________
Prost! |
#7
|
|||
|
|||
does the same blade key work in driver side door?
__________________
-- raymond~ 47º 34'N 122º 18'W |
#8
|
||||
|
||||
yes it does. that's why i'm confused as to what's going on.
__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford. |
#9
|
||||
|
||||
My blade works
Not too much effort to turn in either direction either. Sounds like your lock cylinder may be bad.
__________________
Prost! |
Bookmarks |
|
|