|
|
|
#1
|
|||
|
|||
Replaced Ignition Switch, now won't shift
Hey Guys,
94 C220 replaced ignition tumbler, lock, the works. Now the car when I start it has an SRS light and will not shift out of park. It had no light before and would shift at least with key on. It is worth noting that when I replaced the ignition lock cylinder there is a wire that slides via a bracket onto the cylinder. One side hooks to a clear wire and the other side I have no idea where it came from. So that is not hooked up, could that be my problem and does anyone know where it goes? Thanks, wife has a very very ill mother and needs to go see her ASAP, any help is truly appreciated. |
#2
|
|||
|
|||
There is a BLUE plastic "cam" that goes between the steering lock & switch...if it isn't there OR installed incorrectly you won't be able to get the shifter out of park.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
yes I think I know the one you are talking about, the electrical piece was already installed on the lock when I bought it, so I doubt that is out of place. The car starts of course, just won't move out of park and has the SBS light on.
|
#4
|
|||
|
|||
come on guys, someone has to be able to help on this, PLEASE.
|
#5
|
||||
|
||||
Answer:
I think you are talking about MB# 202 460 00 75.
Parking Interlock Pawl...(Ignition Switch Housing) It should fit together very easy, I have replaced several of these because of damage. Item Number: 2024600075 Main Category: Mercedes Benz Sub Category: Steering Description: Parking Interlock Pawl...(Ignition Switch Housing) Weight: 0.100 Have a great day.
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ |
#6
|
|||
|
|||
Was looking at the repair proceedure for removing
the ignition lock/cylinder in Haynes and they say the key has to be in one specific position when you remove/replace the lock. If it's in any other position the shifter won't work. Might be the cause of your problem. |
Bookmarks |
|
|