need help, my 1990 560sel list to the driverside. fender heights are 27" on the driver front, 28" on the passenger front, 25" on the drivers rear and 26" on the passenger rear. changed the rear subframe mounts this weekend with no help to the list. what is the problem? as i stated in the past the pneumatic shocks were removed and new 560 springs are in the back. although it list it does not create tire wear. also i have tires of 225/60/16. where d0o i look now?

Coil spring "sag" is the MOST common problem when the ride height is incorrect. Possible a replacement THICKER spring pad would help...But I would have the springs replaced.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

so do just the drivers side or all four?

forgot i said it earlier the back springs are new