any one know what to do, my key will not turn the cylinder and the steering wheel is locked up. I did try jacking it up and moving the wheels, but no luck.
anyone have a similar problem?

If you can get the key to position 1, you can replace the tumbler. If you can't get the key to turn, you are in for an expensive repair.
If you will pm me your email address, I'll send you the repair files I have for both scenarios.

__________________

1993 190E 2.3
2001 SLK230
1971 LS5 (454) Corvette Convertible

This happens to all these cars this vintage.

You'll need a new ign switch and when you take your VIN and proof of ownership to a dealer he'll order you one with key that matches what you have now.

__________________
Kent Christensen
Albuquerque
'07 GL320CDI, '10 CL550. '01 Porsche Boxster
Two BMW motorcycles

Welcome Sal, I see you are new. Most of this information can be found by doing a search. Here is the link you need to find out how to get that pesky cylinder out.
Ignition Cylinder Tumbler replacement; mixed diesel/gas
Then you can order one from the dealer. Sometimes the dealer has a loaner cylinder till your matched one arrives. Good Luck

__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif
15 VW Passat TDI
00 E420
98 E300 DT
97 E420 Donor Car - NEED PARTS? PM ME!
97 S500
97 E300D
86 Holden Jackaroo Turbo D
86 300SDL
(o\|/o)