|
|
|
#1
|
|||
|
|||
Where can I find this??
I am looking for a grease gun with a needle attachment to inject grease into the ball joints.
Thanks
__________________
1987 300E |
#2
|
|||
|
|||
Plews sells a needle fitting that goes into a standard grease gun. Their part number is 05-037.
|
#3
|
||||
|
||||
Answer:
Quote:
Have a great day.
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ |
#4
|
||||
|
||||
Two sizes 0.032'' and 0.048'' $3 @ plus shipping
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#5
|
|||
|
|||
Neat...expecially if these service points lack zerk type fittings. but i'm
intrigued: grease will actually find its way through that small aperature? Looking forward to getting one of these needles to try it out.
__________________
-- raymond~ 47º 34'N 122º 18'W |
#6
|
|||
|
|||
One I have has a rubber end, the other a big needle looking affair cant say I ever used them, but that is the case on some of my tools.
|
#7
|
||||
|
||||
I bought mine at Napa. Use it to grease the door hinges on my 380SE. It should also be ok to push through rubber boot for ball joints etc.
__________________
95 E420 ( 76K) SOLD 85 380SE(125k) 95 SL500(72k) |
#8
|
|||
|
|||
Thanks for the replies.
__________________
1987 300E |
Bookmarks |
|
|