Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-10-2001, 04:05 PM
Clancy
Guest
 
Posts: n/a
I need some help with my interior trim. I am trying to put a dash cap on my 1983 300SD. I need to remove the inside post trim that runs up both sides of the front windshield. I can’t figure out how to remove them. I can’t find any screws to unscrew to remove it. I tried to gently pry them up and out but that does not seem to be the trick.

I would be indebted if someone could give me a tip on how to remove them.

Thanks…..
Reply With Quote
  #2  
Old 06-11-2001, 02:29 AM
Steve019
Guest
 
Posts: n/a
I just pulled the dash on my 76 300d. the pillar covers are attached with spring metal s-shaped clip that fits into a slot in the sheetmetal. I had to pull mine back towards me while prying them over the fabric that covers the edge of the door opening. I broke one clip in the process.
Reply With Quote
  #3  
Old 06-12-2001, 05:43 AM
Benzie
Guest
 
Posts: n/a
I just pry them off gently, perpendicularly from the pillar. Good idea to buy some spare clips, the existing ones tend to break off if you pull them in the wrong direction. Ask me how I know.
Reply With Quote
  #4  
Old 06-12-2001, 09:11 PM
Clancy
Guest
 
Posts: n/a
Thanks for the tips, I'll try prying them off and buy some clips to be safe....
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page