POS W210 Brake lights - PeachParts Mercedes-Benz Forum

alabbasi · #1 06-20-2007, 11:00 AM

I replaced the right side tail light cluster in my 97 E420 because the circuit around the brake lights got damaged. Less the a year later, I'm having the same issue and the brake light is out. Is there a way I can hack this with a work around as replacing a defective design clearly didn't work out.

david s poole · #2 06-20-2007, 12:03 PM

come on over and we will engineer a fix.

dukegrad98 · #3 06-20-2007, 01:50 PM

The prior owner of my '98 E300 put in LED taillight clusters. They're a tad more modern if you care about that, and so far seem to work very well. They can be had affordably on eBay. Just something you might want to look into before factory replacement.

Cheers, John

lkchris · #4 06-20-2007, 03:03 PM

Put in the "facelift" taillights

raymond~ · #5 06-20-2007, 03:13 PM

nah....i put in face lifted tails from an E55 and it has started to exhibit same ailment.

alabbasi · #6 06-20-2007, 11:28 PM

Quote:

Originally Posted by david s poole

come on over and we will engineer a fix.

Thanks David, the car will be going on loan to a colleague as she has to turn in her lease, but we'll catch pretty soon.

gplawson · #7 06-21-2007, 12:40 AM

Al,

I have had failures on both pods on my 96. In one case the plastic portion of the light cluster was broken and would not hold the bulb. One fix just a new light pod. In the other case it was the bulb contact location on the pod. I bent up the metal contact panel and all is well. I found the solution on the board but it took a lot of reading. The tail light set up on the W210 could be better.

Greg

alabbasi · #8 06-21-2007, 12:44 AM

Thanks, I was going to try to use tin foil to tilt the bulb a little. I really like the concept of the LED cluster. While I am a purist, these should be completely trouble free, and since Ive already done this once. I wouldn't mind trying something new. It can't be worse then what I have now.

Quote:

Originally Posted by gplawson

Al,

I have had failures on both pods on my 96. In one case the plastic portion of the light cluster was broken and would not hold the bulb. One fix just a new light pod. In the other case it was the bulb contact location on the pod. I bent up the metal contact panel and all is well. I found the solution on the board but it took a lot of reading. The tail light set up on the W210 could be better.

Greg

dukegrad98 · #9 06-21-2007, 08:15 AM

alabassi -- those look just like the units the prior owner of my car installed.

Cheers, John