Hi All,

I'm still very new to the world of the W210 and am in the middle of replacing a headlight.

I started following some of the directions I had seen on removing the front bumper of what now looks like a Pre-Facelift bumper.... but now I'm stuck

I've removed the bottom tray completely. Have also removed the screws attached to the headlights as well as the screws holding the corners of the bumper (in the fender).....

It seems like there are some bolts or clips holding the bumper on in the middle section. But I can't see what needs to be removed...

Help!

Thanks!
J.J.

http://www.detali.ru/cat/oem_mb0.asp?TP=1

Find your car and the bumper diagram. Maybe that will help you figure it out?

Very interesting site but I didn't see body components mentioned anywhere. I've been watching this thread because I have the same question as the originator does concerning headlamp removal. Anyone??

__________________
86 Nissan 720 P/U - 285K miles and counting!!
91 Volvo 240 - 218K miles and still going strong.
00 Mercedes E320 - 111K miles and lovin it!!!

There are lots of pages with body parts for the 210. I don't know what version your car is but here is one of the pages for bumper parts:

http://www.detali.ru/cat/oem_mb2.asp?TP=1&F=210065%5F66G&M=112%2E941&GA=722%2E607722%2E618&CT=F&cat=66G&SID=88&SGR=030&SGN=02