Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 07-05-2007, 05:15 PM
Registered User
Join Date: Jul 2004
Posts: 1
s420 blower regulator -reverse engineer-

I would like to reverse engineer the w140 blower regulator because mine is fried, (on my 1995 S420).
I have already determined most of what I need to know, however there are a few pieces of information I can't determine without a few measurements taken from a good working unit.
Is there anyone willing to do this? I can provide instructions, to whaterer level of detail you need to do this. The unit that would be measured would not be harmed in any way.
You will need a quality Volt/Ohm meter, preferabley with a diode detector on it, or a semiconductor parametric analizer, which even I don't have any access to, and it would help if you had some basic understanding of electronic components. If no diode detector, then I might be able to figure it out with just the resistance and conductance measurements from the Volt/Ohm meter.
If interested in this project, please let me know.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 04:39 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page