|
|
|
#1
|
||||
|
||||
Help, molding problem (ext)
well apparently on my Right, Rear door, Center Molding, the snaps all literally snapped in half, so they are all are broken, and the only thing that held was the screw at the end, I took it completely off, I tried searching online for the snaps, but I couldnt find any! I really don't want to go to the dealership and pay an arm and a leg for 4 pieces of plastic! can someone help me out? it is a 86 300E MB, it's sorta ugly with out molding on the door :/ I put some painters tape over the slits for the snaps to keep dirt/water out. but tape doesn't last forever!
Thanks! Paul
__________________
86 300E - 150K E63 = DREAM CAR |
#2
|
||||
|
||||
Check Fastlane at the top of the site, or if they can't help you go to the dealer. You will be surprised how cheap they are.
__________________
95 SL500 Smoke Silver, Parchment 64K 07 E350 4matic Station Wagon White 34K 02 E320 4Matic Silver/grey 80K 05 F150 Silver 44K |
#3
|
|||
|
|||
Are you looking for the red plastic bullets? I have a handfull in the tool box. When I needed one, I broke three replacing the one, so I ordered a dozen. How many do you need?
__________________
2000 C230 Kompressor "Frosty" 2007 PT Cruiser 2001 VW TDI Beetle 1999 Landrover Discovery II 1971 Corvette Gone: 97 Cabrio, 83 240D, 93 VW Eurovan, 95 Volvo 850, 93 Chevy Astro Van, 77 VW Bus, 99 VW Jetta, 74 VW Bus |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|