Anyone had any trouble with the Nissens brand radiator? I need to order something today and I don't know if I should stick with the Behr or if the quality of the Nissens is on par. I've seen a couple of posts where it seems to have been ok. I'd like hear of any experiences, good or bad....

Thanks

Ken Fuller
1990 300E
145K miles

Ken:

In addition to what you learn here, you might also check out the following:

http://www.mercedes.pair.com/archives

Click on SEARCH ENGINE

Within FORMAT, select SHORT.

Click on SUBMIT.

Regards.

__________________
Mike Murrell
1991 300-SEL - Model 126
M103 - SOHC
"Fräulein"

Very good quality , sell them all the time with no complaints.

I have one on my 124 for 2 year, it was less than $200.00.

jack

Just to close the loop, I purchased a Nissen from Fastlane yesterday. I talked to Phil first as I was concerned about it being like the original. He said it was almost exactly like the Behr and that no one had had problems.

I was concerned about getting it today, but it arrived by 10 AM, just as Phil said it would. Spent 2 hours putting it on and puttering around under the hood. It fit almost perfect and it seems to work fine. There is very little difference to the Behr. It fact I wondered if maybe Nissen was OEM at one time.

Thanks everyone for your input.

Ken Fuller
1990 300E
145K miles