|
|
|
|
|
#1
09-23-2007, 11:21 PM
|
|||
|
|||
|
Driver's window doesn't work
1987 560 SEC. I've it about a month. Motor works, ran 12v to it and it went up and down. Switch works, tried it in other locations, OK. I reached into the door to where the wires come in, couldn't feel anything out of the ordinary. How do you check the wires there anyway???? I don't have a wiring diagram to trace voltage to or from the switch. All other windows work fine. Any ideas???????? Oh yea ---
great car!!!!! Reed
__________________
Reed 1987 560 SEC 1980 Triumph Spitfire (drove off the showroom floor) work in progress 1980 Triumph Spitfire (parts car) 1999 Jeep Grand Cherokee (wife's) Last edited by Reed007; 09-23-2007 at 11:29 PM. Reason: added info 
|
|
#2
09-24-2007, 09:51 AM
|
||||
|
||||
|
Check the continuity on each side of the door tunnel. If you find a wire without continuity there is your problem.
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o)
|
|
#3
09-24-2007, 11:45 PM
|
|||
|
|||
|
Where do I get to the wires on the car side of the door tunnel. I see there is one window relay. Is that relay closed all the time supplying 12v to the switches?
Reed
__________________
Reed 1987 560 SEC 1980 Triumph Spitfire (drove off the showroom floor) work in progress 1980 Triumph Spitfire (parts car) 1999 Jeep Grand Cherokee (wife's)
|
 |
| Bookmarks |
|
|
Linear Mode
