switch to adjust fan speed in stuck on 1 and 2. i tried to take it out but i didnt want to dismantle the enitire console. is there an easier way?whats the propblem?

Go to USER CP tab and add your vehicle to your signature so we know if it's a Ford or a Chevy.

__________________
Terry Allison
N. Calif. & Boca Chica, Panama

09' E320 Bluetec 77k (USA)
09' Hyundai Santa Fe Diesel 48k (S.A.)

any help out there???

__________________
1990 190e 2.6L

The fan switch has tiny plastic bits stopping the rollers from going too far and jamming. Obviously, they eventually fail.

I object to paying for a new switch. They come apart with a bit of persuasion, and can be pop-riveted back together. I drilled 1/16 holes through the whole switch, at exactly the right place, and pushed 1/16 cotter pins through to stop the rollers from over-centering and jamming the switch. The result is much stronger than new. I only wish that I had done all the switch positions the first time I had it apart.

And, yes, the dash has to come apart a little bit. Center vents out, exposes the screws, centre plastic bit out, tiny wood strip out (oh so carefully), reach down to unhook the A/C clips, pull out A/C panel, then the switch comes out.