|
|
|
#1
|
|||
|
|||
How to remove and re-install brake booster ?
Hi,
can anyone give instructions on how to remove and re-install brake booster on 1996 E320 please? Thanks!
__________________
1996 E320 since 1/16/08, 171K miles as of Feb 2011 --------------------------------------------------------- 1989 300CE - R.I.P. Dec 29 2007 Other MBs (sold): 1992 300E-24 - 1979 350SLC - 1984 230E - 1990 300CE Last edited by Texholdem; 03-05-2009 at 09:52 PM. |
#2
|
|||
|
|||
Remove the driver's side under dash panel, then remove the clip that hold the booter to the brake pedal and the 4 nut's that hold the booster to the fire wall. Next remove the 2 bolts that hold the master cylinder to the booster, pull the master cylinder out of the way nice and easy(so it will go back into place after you install the new booster). Unplug the sensor's and remove the booster vacuum line.
Then fenagal the booster out and reinstall in the reverse order. |
#3
|
|||
|
|||
Thanks redcoupe, I'll give it a try and report back.
__________________
1996 E320 since 1/16/08, 171K miles as of Feb 2011 --------------------------------------------------------- 1989 300CE - R.I.P. Dec 29 2007 Other MBs (sold): 1992 300E-24 - 1979 350SLC - 1984 230E - 1990 300CE |
Bookmarks |
|
|