My 280te has more steering play than I would like. The steering gear box was just adjusted to the maximum amount but it is still too loose. Can I rebuild mine, does it make sense to buy a used one or should I buy a rebuilt unit? Does anyone know if it is the same part as a 300td box from the same year. And the last question; is how difficult is it to swap out?

I would try and fine a good used one since a rebuilt one is like $400


any W123 box should swap over

It should be the same box. Did the adjusting party turn the adjusting screw anticlockwise?

I have been able to adjust them successfully even with 300K miles on them.

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

I assume he did it correctly it was adjusted by the owner of a very busy shop but then again.....who knows. I will give it another shot myself before I actually change it.

How to reseal a MB steering gear
(Without loosing your balls)
Written by David Petryk
Photos by Gerard Buhlon










Have a great day.

__________________
ASE Master Mechanic
asemastermechanic@juno.com

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
1984 190D
2003 Volvo V70
2002 Honda Civic

https://www.boldegoist.com/

Good idea. Adjusting the box on a 280e is tough down under the intake but a lot easier than changing out the box.

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

Hi,

Can you adjust the steering box without taking off the intake manifold?

Thanks

Need a little data first.
* YEAR
* MAKE
* Model

Sorry,

The car is 1983 280te.

I cannot see a way around taking off the intake manifold to adjust the steering box.

Thanks,

Keith

Could you reach up in there from underneath?

__________________
-diesel is not just a fuel, its a way of life-
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)