Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-02-2001, 09:50 AM
Subman's Avatar
Senior Member
 
Join Date: Apr 2000
Location: South Florida
Posts: 447
More than a leak at the torque converter Help!!

In my 94 E420 I noticed smoke comming out of the back of the car. I could not figure it out so I pulled over to the side of the road and in to a gas station and Imedatly turned the car off after takeing the skid pan off I started the car up to find trans fluid leaking from the converter housing! Now I am getting worried.
My questinon is do I have to take the motor out to take the torque converter off. Or can I just drop the trans down like in an American car.
I think this happened due to what manny people call a brake stand. Ill give the whole story in a nother post.
Thank You any help would geatly appricated.
__________________
Factory trained Mercedes-Benz Technician
Look At My Website
-2002 C32
(E420 has passed away)
The best way to contat me is e-mail.

Reply With Quote
  #2  
Old 08-02-2001, 09:41 PM
MB Medic
Guest
 
Posts: n/a
The trans will have to come out if it's in the front pump area, probably the front seal.
Good Luck
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
diesel torque converter vaughneagan Tech Help 1 01-09-2005 06:38 PM
Torque Converter Rotation bobkat Tech Help 6 01-04-2005 03:56 AM
Torque converter click? jrbnc Tech Help 0 12-17-2003 01:04 PM
Torque Converter Drain Plug ALBERTO Tech Help 2 10-21-2003 10:08 PM
1983 240D torque converter removal engatwork Tech Help 6 11-18-2001 01:30 AM



All times are GMT -4. The time now is 12:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page