|
|
|
#1
|
|||
|
|||
86 560 SEL Crankshaft position sensor
Has anybody ever replaced this any help would be appreciated.
|
#2
|
|||
|
|||
Only 1 allen bolt and a few wire ties. should take less than 1/2 hr,
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
Do I access it from the top or underneath the car.
|
#4
|
|||
|
|||
Do i access it from the top or underneath the car.
|
#5
|
|||
|
|||
from the drivers side at the top.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#6
|
|||
|
|||
Thanks for the help.It was easier from underneath the car.One Allen bolt and it was out, less than 15 minutes
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|