|
|
|
|
|
#2
08-08-2001, 04:50 PM
|
||||
|
||||
|
The wood panel at the shifter gate on the W210 is clamped in...you were right on the ripping-it-off part...but be sure to rip-it-off gentle.
I don't know about the W210 (I only worked on manual shifted W210s), but on all (older) MB models the indicator for the selected gear is just a fiber optic wire that is connected to the gear shaft and ends at the bulb for total illumination of the gear selector box...If the auto selector box on the W210 is the same as on the older models, this fiber optic wire is loose and not connected properly to the gear shaft anymore. greetingz,
__________________
1990 300SL-24 1993 C250D with a minor 600+k kilometer www.MBenzNL.com(the Netherlands) 
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 722.3/4 trans start gear [ 1st/2nd ?] | Arthur Dalton | Tech Help | 2 | 07-02-2005 06:34 AM |
| W210 Won't shift out of first gear... | 95s420 | Tech Help | 5 | 06-01-2004 02:08 PM |
| 83 240D Manual Trans rebuild--I finished it, but something is wierd about 3 rd Gear.. | Carrameow | Diesel Discussion | 9 | 02-13-2004 12:56 PM |
| 83 240D Manual Trans rebuild--I finished it, but something is wierd about 3 rd Gear.. | Carrameow | Tech Help | 4 | 12-30-2003 12:40 AM |
| How to replace gear shift "shutter" in W210 | ss109 | Tech Help | 1 | 07-19-2000 09:35 PM |
Threaded Mode
