Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-07-2008, 08:38 AM
Ray
 
Join Date: Feb 2006
Location: Emerald Isle NC
Posts: 56
ATA problem 1995 e320 Car won't start

I am running through diagnostics with the very patient help of A. Dalton. We have covered testing fuses, battery, x27 x49 and are up to pulling the instrument cluster to check k38.
Before I did that I wanted to post what i discovered this morning about the ATA system in hopes that someone my have experience that would help me.
The ATA led would not arm from the driver's side door. Today i discovered that it will arm (start flashing on the dash) from the rear hatch and from the passenger side door. The drivers side door will not disarm the alarm. IE if i unlock the driver door and open the alarms go off. However if i then close the door and lock it the alarm is disabled. Both the passenger door and hatch will arm and disarm the system. I tried cranking each time between arming and disarming by various doors but still no crank. At least I know the ATA led is powered now.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page