|
|
|
|
|
#1
05-07-2008, 06:55 AM
|
|||
|
|||
|
Grinding gearshifter noise
Hello everyone
 , I'm a newbie here. I'm having a problem with my w126 260SE. Took it out for a spin from the shop, as I was heading back to the shop I accidentally flipped the gearbox from D to 3, then I noticed that there is a grinding coming from the gearbox when the car is in motion, but when I flipped it back to D everything returned to normal. Even the mechanic who's working on the car found it strange because the transmission was working perfectly, the shifts are smooth and seamless, I hope this problem would'nt set me back by a fortune again
|
|
#2
05-07-2008, 07:58 AM
|
|||
|
|||
|
Removing the trans oil pan would be a good idea!
Any signs of metal will tell the truth.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
|
#3
05-08-2008, 06:22 AM
|
|||
|
|||
|
Went to the shop today to check on my car. I'm happy that the problem has been resolved
. Turns out that the shifting rod was not properly aligned thereby causing the grinding noise. (according to the mechanic)
__________________
1982 200 W123 1992 300E 2.6 W124 1990 260SE W126 1994 S280 W140 2010 E300 W212
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
