I will be replacing the left front seat switch on my '94 s320 soon and I am wondering just how to carefully remove the wood trim with out scratching or breaking it. the switch should not be a problem just three screws. Thanks.

THe panel has two small swivels at the rear, that have to be rotaded down. A feeler guage a smsll spatula etc. run it down the back of the panel. when re-installing pivot them back out, the front is held by a spring (leaf)
The door check section will help
http://www.peachparts.com/Wikka/W140DoorCheck

Thanks very much.I will try that when my seat switch arrived this Friday. I appreciate your time to reply. Michael

I tried that and it worked just fine. Thanks very much.Michael