|
|
|
#1
|
||||
|
||||
E320 1994 Asr
My ASR is on and I got the following codes with Arthur's tool.
pin6 code 8 pin7 code 1 pin8 code 1 I can't read pin 2 (there is a little LED and a push button one next to each other) Where do I plug the reader? vin WDBEA92E4RF291935 Thanks
__________________
New Addition to the family 2013 Passat TDI 5Miles 2004 E500 4MATIC Wagon 95k 1996 E300 Diesel 173k Sold 1993 300E 2.8 230k Sold 1994 E320 White Wagon 373K Sold Still dreaming about ....500E Radu Negru |
#2
|
|||
|
|||
ASR codes are on pin #14.........
__________________
A Dalton |
#3
|
||||
|
||||
pin 14 has no electrical connection
__________________
New Addition to the family 2013 Passat TDI 5Miles 2004 E500 4MATIC Wagon 95k 1996 E300 Diesel 173k Sold 1993 300E 2.8 230k Sold 1994 E320 White Wagon 373K Sold Still dreaming about ....500E Radu Negru |
#4
|
|||
|
|||
You have a 124.092 E320T/USA/1994 version...correct???
If yes, Then you do indeed have an EA/CC/ISC Module N4/1 at pin #14 of the 16 pin Diagnostic Connector Box. E320 16 PIN DTC Charts inc. pin 8, pin 14
__________________
A Dalton Last edited by Arthur Dalton; 05-24-2008 at 08:58 PM. |
#5
|
||||
|
||||
Pin14 I got the following codes 2, 5, 14
__________________
New Addition to the family 2013 Passat TDI 5Miles 2004 E500 4MATIC Wagon 95k 1996 E300 Diesel 173k Sold 1993 300E 2.8 230k Sold 1994 E320 White Wagon 373K Sold Still dreaming about ....500E Radu Negru |
#6
|
|||
|
|||
I thought you had no pin in #14....
Anyway, I would start by changing the brake lamp switch and checking the CTP adjustment.
__________________
A Dalton Last edited by Arthur Dalton; 05-28-2008 at 09:17 AM. |
#7
|
||||
|
||||
what is CTP? and how to adjust it?
Thank You
__________________
New Addition to the family 2013 Passat TDI 5Miles 2004 E500 4MATIC Wagon 95k 1996 E300 Diesel 173k Sold 1993 300E 2.8 230k Sold 1994 E320 White Wagon 373K Sold Still dreaming about ....500E Radu Negru |
#8
|
|||
|
|||
Closed Throttle Position switch..
It has a thumbwheel adjuster at the cable..you want a 1/4" slack to make sure the sw can close. Code 14 on pin 14.
__________________
A Dalton |
#9
|
||||
|
||||
Thanks Arthur,
adjusting the cable did the trick. There was no need for the brake light switch...but I have one handy anyway It also solved my sticky idle problem...
__________________
New Addition to the family 2013 Passat TDI 5Miles 2004 E500 4MATIC Wagon 95k 1996 E300 Diesel 173k Sold 1993 300E 2.8 230k Sold 1994 E320 White Wagon 373K Sold Still dreaming about ....500E Radu Negru |
#10
|
|||
|
|||
Quote:
Spray the cable with some lube..
__________________
A Dalton |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|