Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-23-2008, 02:27 PM
Registered User
 
Join Date: Aug 2005
Posts: 93
little help with Cooling system ...

The light for the raidator in my dash is on in my 2000 ml 320 ..... I opened the hood and took a look , when facing the motor after I open the hood , there is " I Think " a reserve small tank in the far back (below the windsheild ) , there is a small hose , ( Maybe 1/2 inch ) right below the cap on that small tank , I followed the hose only to see that it is disconnected , I looked around and can't see where it belongs , any idea's or any DIY's that I can take a look at to see where this hose is supposed to be connected too ?? ...............Thank you

Reply With Quote
  #2  
Old 06-23-2008, 11:20 PM
280EZRider's Avatar
No Dumping
 
Join Date: Jul 2007
Location: Southern Oregon Valley
Posts: 1,599
I'm not familaiar with your model, but in general if the cap is metal, then it would be the expansion tank for the radiator and most definitely needs to be reconnected. And your engine is probably overheating as well. If it's a plastic snap-on cap, it's the windshield washer tank - less important, but you should reconnect this too.
__________________

Don't Chrome them; polish them
Reply With Quote
  #3  
Old 06-24-2008, 04:44 AM
bobs's Avatar
Registered User
 
Join Date: May 2007
Location: Richmond, VA
Posts: 310
The light is telling you you're low on coolant. So you might want to get some 50/50 mix of MB coolant and water and refill the expansion tank.

The hose you're following is most likely an overflow hose for either the windshield washer reservoir or the coolant expansion tank. Either way, one end of it is *supposed to be* disconnected.

Regarding the cap type: If it is a snap-on type cap, then you're found the windshield washer reservoir. On all my cars the cap is imprinted with the windshield/squirting water icon.

The coolant expansion will have a screw-on type cap because it is required to hold pressure. It will also have the same symbol on it as your coolant warning light. There will also most likely be a warning sticker telling you not to open it when it is hot. Good advice. I suggest you follow it.

__________________
"It's not about how fast you can go, but how well you can go fast."

Bob in Richmond

'97 S320 (LWB), Ruby Red Metallic, 73k miles
'97 S420V, Smoke Silver Metallic, 155k miles
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page