I have a 1998 S320, I just bought the car and i figured the batteries in the remote were dead, so i changed them.
when i press the button on the remote, the red light comes on in the remote, but nothing happens with the doors, no lights flash by the lock or trunk.
how do i program it?
I did not get the wners manual with the car
any help I would appreciate
thanks

See if this helps (attachment)

Attached Thumbnails

 

__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician

i tried that, no luck, no lights are turning on the door handle.
is there another way b/c i see many ways online , there must be a specific one for a 1998 s320
thanks

What is the proper way to open the remote to change the battery?

__________________
1982 300sd (totalled) 1992 300se

That was taken from a 1998 S320 owners manual.

__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician

Try pointing the remote at one of the other lock receivers. It's possibly the one you're testing with is bad. Stevebfl's instructions are accurate, because I have used that exact procedure to re-sync the key on my '97 S320.

If it still doesn't work, then I'd say you either have a problem with the transmitter diode in the key or there's a problem with the car's security module.

You can test the key by aiming it a digital camera and pressing the button. The CCD in modern digital cameras can detect the infra-red beam emitted by the key. So if you watch the viewfinder while pressing the button, you will see the LED flicker with a kind of white/purple color.

I'm not sure about how to test the car's module though. I imagine the Star Diagnostic system would probably have a way to do that.

__________________
"It's not about how fast you can go, but how well you can go fast."

Bob in Richmond

'97 S320 (LWB), Ruby Red Metallic, 73k miles
'97 S420V, Smoke Silver Metallic, 155k miles