|
|
|
#1
|
|||
|
|||
'89 190e 2.6 Crank Angle Sensor
Could someone please tell me where the Crank Angle Sensor is located on a '89 190e 2.6 ....
Thanks, Umail |
#2
|
|||
|
|||
At the rear of the engine behind the oil filter housing area.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
Is that the object that seems to attached at the base of the oil filter? It has a one prong connector attached.
|
#4
|
||||
|
||||
Probably....just to be sure, trace the other end to make sure it goes to the Ignition Control Module.
__________________
1993 190E 2.3 2001 SLK230 1971 LS5 (454) Corvette Convertible |
#5
|
|||
|
|||
Thanks a million to both of you ...found and removed it.
It had a lot of oil on probe ... is that normal or reasonable ? |
#6
|
|||
|
|||
Oil pressure sender?
Make sure you haven't removed the oil pressure sender instead of the crank angle sensor.
|
Bookmarks |
|
|