|
|
|
#1
|
|||
|
|||
E320 onboard computer
I have an E320 which I purchased in Japan and later shipped back to New Zealand. The problem I have is that the onboard computer displays in Japanese....which I do not read too well! Does anyone know of a programme which I can use to change this over to English?
Appreciate any suggestions. |
#2
|
||||
|
||||
What year is your vehicle? I believe on my 98 E320 I can change the language from the buttons on the instrument cluster. The procedure is in the owners manual. However, if your manual is in Japanese, following them might be difficult. If you have newer model with COMMAND with buttons on steering wheel procedure would be different anyway. Look for a link in the DIY section of www.benzworld.org for downloadable manuals in english for your MY. Your problem may also be regional and some languages may not be supported. Good luck
UPDATE: If you have the function buttons on the edges of the instrument cluster at 9 o'clock and 3 o'clock you can change the language as follows: 0 - Turn the key to the position '2' (last indent before starting) 1 - Simultaneously press the 'O' and 'R' buttons until the current language selection appears. 2 - Press the 'O' button until the desired language appears. 3 - Turn the key to off As I mentioned language choices may be regional. In my US car I have English, French, German, Italian and Spanish. A car exported to the Far East may not have English as a choice. Last edited by RichardM98; 07-03-2008 at 03:50 PM. |
#3
|
|||
|
|||
onboard computer
Many thanks for your help...I will give this a try.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|