![]() |
|
|
|
#1
|
|||
|
|||
Vacuum element for fuel filler door melted
What would cause the vaccum element for fuel filler door on a 1986 mercedes 560sl to melt? I have been reading about the importance of vacuum for door locks, hesitation, etc. but no post talks about a melted vacuum element, WTH could do this?
See picture below. |
#2
|
||||
|
||||
Wow...maybe years of gasoline splashing onto it melted it?
__________________
Current cars: 2000 ML55 AMG, 174k miles 2003 C240 T-Modell, 202k miles 1995 S320, 207k Miles |
#3
|
|||
|
|||
vacuum element for fule filler door
jonathon, the gas is on other side of fender, how could it ever get to inside of fender?
|
#4
|
||||
|
||||
A small amount could have seeped in over the years...the seal probably doesn't seal so well anymore after 20 years...
__________________
Current cars: 2000 ML55 AMG, 174k miles 2003 C240 T-Modell, 202k miles 1995 S320, 207k Miles |
#5
|
||||
|
||||
Battery acid - either not properly vented, or at one point and time, the battery exploded.
__________________
It is a truism that almost any sect, cult, or religion will legislate its creed into law if it acquires the political power to do so. Robert A. Heinlein 09 Jetta TDI 1985 300D |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|