Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-24-2001, 07:07 PM
aiino
Guest
 
Posts: n/a
pre-detonation problem

i have an '89 mbz 300E that seems to have a pre-detonation problem. the car pre-detonates when the engine is warmed up and under full load only (i.e. full throttle). i have already replaced the rear crank sensor that connects to the rear of the engine to the ezl ignition control unit. i also replaced the ezl control unit, spark plugs, spark plug wires, distibutor cap & rotor, fuel distributor & EHA, resistor plug (under brake booster), air flow sensor, throttle body, and all the engine temperature sensors (on the engine head). i also use only 92 octane gas and have used various fuel treatments and octane boosters. it still pre-detonates under full throttle when the engine is warmed up.

the only thing that i can think of is carbon deposits. i have already used a carbon cleaner. it seemed to help a little, but not 100%. (the problem is still there.) i was going to use a product called sea foam carbon cleaner. does anyone have any feedback on this product?

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Running list of failures during 3 years of ownership Q ML, GL, G-Wagen, R-Class, Unimog, Sprinter 33 01-22-2006 08:13 AM
240D intermittant starting problem pj67coll Diesel Discussion 12 12-13-2003 07:16 AM
Electrical Problem? 87300SDLTurbo Tech Help 0 10-23-2002 02:29 AM
Igniton switch or Relay Problem cmusante Tech Help 1 10-07-2002 06:00 PM
Paying Labor Cost to look for problem!!!! Aija Tech Help 4 07-20-2002 09:13 AM



All times are GMT -4. The time now is 12:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page