my check engine lit on so i went to the mechanic. After scanning with the machine, this is what appeared on the paper,
code 32:
stored O2 sensor
heater cafter\
downstream of
Cat. conv.
heating current (amp) too small?

what does all of that means?
please help.

OF course that didn't set the check engine lamp!
ON that car an ODB2 code will set the MIL. Like P0 136.

That code from the fuel computer means that the heater circuit of the rear O2 sensor is drawing too much OR too little current from the computer.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

thanks mb doc