i know that we can not use seafoamo on a trubocharged engine, but can we do it on a supercharged engine, (c230 kompressor)?
thanks for any help

Nope!

Why not a turbo engine?

Seafoam is naptha.
A very harsh solvent which breaks a lot of stuff loose.
All the junk has to go by your turbo impeller as it exits the engine.
Possible to do damage to the turbine blade.

I would only use naptha in an engine that is junk...

__________________
http://i19.photobucket.com/albums/b1...c/GOWIDE-1.jpg
1971 280SL ROADSTER
1988 300CE TWIN TURBO WIDEBODY
1994 E320 CABRIOLET
1999 C43 AMG
2005 G55K AMG
2008 CLK63 AMG BLACK SERIES

Doesnt the motor burn up anything that is broken loose? I have used it on all my cars and my truck with no problems.

I used Seafom in all of my Turbocharged Audis with no problems at all. I just replaced my KKK turbo for a Garrett on my 200 and the turbo is intact. Don't know how intricate the Benz engines are to react to the Seaform but the Audi engines have no ill effect...

Once it's iused, connect everything together hose wise, drive her hard and get ready for the smoke screen.... ala' Death Race.....

__________________
"Why operate within the law when you can operate above it?"

MB roster
'85 500SE euro Ratrod
'92 500E's x2 / '94 E500 stored
'91 560SEC w/43K stored
'92 Cabby 16V OE 2.1 AutoX car
JDM RHD cars now.

Are you guys talking about putting the Seafoam in oil or in the fuel? Can I put it ini the oil of my 98 e320?

__________________
1998 E320 150,000
1980 300SD 240,000
1965 190D 79,000