|
|
|
#1
|
|||
|
|||
91' 190 2.6 Trans problem!!
So I bit the bullet and bought a pristine condition black 91' 190E 2.6 auto from single owner. knowing it has a trans problem, I bought it becuase of all the other maintenance has been done and updated: i.e head gasket, head job, radiator, brakes, blower, etc. reciepts in hand. What he told me was he came to a red light and when he went to accelerate, the car would not come out of 1st (2nd). The car still has reverse and 1st gear operation but nothing else. He pointed me in the way of a governor in or on the transmission. Has anyone heard of this and is there anywhere else to go before I hunt down a replacement trans???
__________________
"Why operate within the law when you can operate above it?" MB roster '85 500SE euro Ratrod '92 500E's x2 / '94 E500 stored '91 560SEC w/43K stored '92 Cabby 16V OE 2.1 AutoX car JDM RHD cars now. |
#2
|
|||
|
|||
That trans has plastic governor gears & they do break.
Replacement takes about 4 hrs.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
PM sent... Also where is a good source to get the plastic governor gears?
__________________
"Why operate within the law when you can operate above it?" MB roster '85 500SE euro Ratrod '92 500E's x2 / '94 E500 stored '91 560SEC w/43K stored '92 Cabby 16V OE 2.1 AutoX car JDM RHD cars now. |
#4
|
||||
|
||||
Call your local MB dealer, I have found their prices to be quite reasonable at times.
__________________
'86 300E 5 speed '71 Triumph TR6 '46 Cushman Scooter '41 Ford 9N tractor |
#5
|
|||
|
|||
will do.....
__________________
"Why operate within the law when you can operate above it?" MB roster '85 500SE euro Ratrod '92 500E's x2 / '94 E500 stored '91 560SEC w/43K stored '92 Cabby 16V OE 2.1 AutoX car JDM RHD cars now. |
#6
|
|||
|
|||
You will need to remove the rear cover on the trans. Requires a 27MM 12 point deep socket.
Also removal of the governor requires a pair of LONG right angle snap ring pliers. Most likely you will find a spring lodged in the rear pump that caused the gears to break.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#7
|
|||
|
|||
Quote:
Could this be a In-car process our do I have to actually drop the transmission?
__________________
"Why operate within the law when you can operate above it?" MB roster '85 500SE euro Ratrod '92 500E's x2 / '94 E500 stored '91 560SEC w/43K stored '92 Cabby 16V OE 2.1 AutoX car JDM RHD cars now. |
#8
|
|||
|
|||
We always do that in car....
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#9
|
|||
|
|||
Will do... Do you recommend me replaceing anything else or a parts list incorporated with this repair?
__________________
"Why operate within the law when you can operate above it?" MB roster '85 500SE euro Ratrod '92 500E's x2 / '94 E500 stored '91 560SEC w/43K stored '92 Cabby 16V OE 2.1 AutoX car JDM RHD cars now. |
Bookmarks |
|
|