I'm going crazy with so many codes and electrical problems going on at the same time. Yesterday a malfunction code displaying a low beam right lamp not working, check lamp, came in display and the R Headlamp is not working. Thought it was the bulb, replace it and no success. Started reading the WIS and hardly found the wiring diagrams. The bulb is not receiving 12 volts through the yellow wire that comes from the N10/6 control module. Does that mean that the module is not working? I read the left SAM controls many things and all are working in order. The rest of the bulbs in the headlamp are working.

Any past experience with these modules? Should I look somewhere else?

Thanks for your reply.

Darrel