Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-06-2009, 11:13 PM
Registered User
 
Join Date: Mar 2009
Posts: 5
Post 2000 E320 AC -EC light On

Ok my ac quit blowing cold air out the left side for several days. Now it quit blowing cold air all together. The EC light is on. I pulled the codes. It appears it is just low on Freon. The compressor does not kick in. Reading the static pressure is 70 psi. I tried to jumper the pressure switch on the drier without any luck. Does anyone know how to get the compressor to start again so I can check the system with my AC gauges and charge the system. I have seen that in a couple of sites they say to replace the evap temp sensor under the dash. But will that solve the compressor from not starting? Do I need to reset the ECT on the climate control to get things going again? If so how. Thanks

Last edited by Rdhyde99; 03-07-2009 at 02:02 PM.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page