Somehow while installing my freshly cleaned fuel injectors I managed to break, or more like snap the brake booster vac line at its connection to the intake manifold. It seems that there is a yellowish piece that runs from the inner part of the hose and goes in thru the grommet on the manifold. I tried pulling out the piece that was left in the grommet, but it looks like im going to have to break it into little pieces to pull it all out. I guess my question is, can the grommet itself be removed, or will I have to pull off the intake to accomplish this? Also, could I use some vac hose and clamps to fix this problem, or am I better buying the whole new unit for $54 from ********? See pics below....

Attached Thumbnails

       

Thar was designed in Disney World...ie: Mickey Mouse!

Better off with all new OE parts.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator