![]() |
|
|
|
#1
|
||||
|
||||
95 E320 wagon with ASR/ABS lights on
I have a 95 e320wagon. The ABS /ASR combo lighhts are on.
I replaced the front brakes. The brake pedal switch. All Brake lights work and car runs/drives perfectly with no limp home mode. I tried to to spray the asr switches at each wheel. still both lights are on. Where do I go next?? There is some asr/abs module located some where or another. Where is it? PS I do not havv a "code puller...is there a work around |
#2
|
|||
|
|||
One or two abs speed sensor located on the differntial
check ovp relay also |
#3
|
|||
|
|||
The work around for not having a code reader would certainly be more work than building the code reader. It's less than $10 and takes only a few minutes to build.
E320 16 PIN DTC Charts inc. pin 8, pin 14 |
#4
|
|||
|
|||
First check is fuse on top of OVP................................
__________________
A Dalton |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|