|
|
|
|
|
#1
07-04-2009, 11:58 PM
|
|||
|
|||
|
Are Vemo crank position sensors good quality?
We all see some aftermarket parts which are poorly made-esp suspension parts. Vemo brand is $56 and best wholesale dlr price is about $120. If Vemo is an good OE supplier then it looks good to me. Does anyone know about vemo? Thanks
|
|
#2
07-05-2009, 12:51 AM
|
||||
|
||||
|
Never heard of them. I got an OEM Bosch one for about $110 online back in February....it has worked perfectly. On something critical to the cars operation and reliability like that sensor I'd stick with Bosch/OEM MB
__________________
-diesel is not just a fuel, its a way of life-  '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k)
|
|
#5
07-06-2009, 09:03 AM
|
|||
|
|||
|
Most Vemo products are "China" quality!!
Vaico & Vemo are "Wulf Gaertner" importer parts.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
|
#7
07-06-2009, 10:56 AM
|
|||
|
|||
|
Hella (AB Electronics) can be original OE part...but they also supply aftermarket "China" stuff as well.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
|
#8
07-06-2009, 10:58 PM
|
|||
|
|||
|
final answer CPS tested and was bad. replaced c MB
My favorite tech got the car to reproduce sx by "heat soaking"-letting it get hot. then pulled part and put on ohm meter. He heated it up and R climbed until failure.
Happy ending. Thanks for the Hella warning
|
 |
| Bookmarks |
|
|
Linear Mode
