Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-11-2009, 12:13 PM
Registered User
 
Join Date: Mar 2008
Posts: 98
Jumpering 420SEL power window switch

The power window switch for the front passenger side window on my '87 420SEL is broken. I know the problem is in the switch because I checked it with an ohmmeter and compared the results to the other, known good power window switches. Then I took the switch apart and found that one of the center plastic pillars that holds the spring on one side is broken.

So I ordered a new switch, but until it arrives, which terminals on the connector should I jumper in order to make the window roll up?

Also, must one of the pins on the connector be grounded in order for the motor to receive power?

The terminals are numbered 1, 2, 3, 4 and 58.

Last edited by retroguybilly; 07-11-2009 at 12:26 PM.
Reply With Quote
  #2  
Old 07-11-2009, 12:57 PM
Registered User
 
Join Date: Mar 2008
Posts: 98
Doh! Please consider this thread "inoperative", as Ron Ziegler used to say.

I just realized that all I had to do was swap the rear switch into the front switch's position and the problem was solved.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page